Huawei SmartAX MA5616 Configuration Manual page 345

SmartAX MA5616 Multi-service Access Module
Configuration Guide
For details about the PITP configuration for the user account security, see
Roaming of User Account Through
Step 8 Save the data.
huawei(config)#save
----End
Verification
l
l
l
Configuration File
Configuration File for the ADSL access mode:
vlan 50 smart
port vlan 50 0/0 0
adsl line-profile quickadd 3 2 snr 60 30 120 60 30 120
adsl channel-profile quickadd 3 interleaved-delay 10 10 rate 1024 2048 3096 1024
2048 3096
adsl line-template quickadd 3 line 3 channel1 3 60 70 channel2 3
interface adsl 0/2
deactivate 0
activate 0 template-index 3
alarm-config 0 1
quit
service-port 1 vlan 50 adsl 0/2/0 vpi 1 vci 39 inbound traffic-table index 5
outbound traffic-table index 5
service-port desc 1 description MA5616HW/Vlanid:50/adsl/smart
mac-address max-mac-count service-port 1 16
mac-pool xpoa 0000-1111-1010 300
pppoa enable
encapsulation 0/2/0 vpi 1 vci 39 type pppoa llc
pitp enable pmode
raio-mode cntel pitp-pmode
save
Configuration File for the SHDSL access mode:
vlan 50 smart
port vlan 50 0/0 0
shdsl line-profile quickadd 3 line four-wire rate 2048
interface shl 0/4
deactivate 0
activate 0 3
alarm-config 0 1
quit
service-port 2 vlan 50 shdsl mode atm 0/4/0 vpi 1 vci 39 inbound traffic-table index
5 outbound traffic-table index 5
service-port desc 2 description MA5616HW/Vlanid:50/shdsl/smart
mac-address max-mac-count service-port 2 16
mac-pool xpoa 0000-1111-1010 300
pppoa enable
Issue 04 (2011-10-30)
NOTE
Step 1: Set the VPI/VCI of the modem to 1/39 and encapsulation mode to llc-pppoa.
Configure the user name and password used for dialing (the user name and password must
be the same as those configured on the BRAS.)
Step 2: After the settings on the modem are completed, dialing is initialized, a network
connection is automatically set up, and the user can access the Internet.
Step 3: To download a file through FTP, open Windows Task Manager and then click
Networking to observe the link rate. Calculate the Internet access rate by the formula:
attainable Internet access rate = computer NIC rate/48 x 53 x 8. The calculated result
approximates to the planned 2048 kbit/s.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Configuration Example of Services on the MA5616
PITP.
Through GPON Upstream Transmission
3.10.1 Configuring Anti-Theft and
334