Huawei SmartAX MA5616 Configuration Manual page 218

SmartAX MA5616 Multi-service Access Module
Configuration Guide
l
The voice pre-configuraiton profile of the MA5616 supports the configuration of main voice
parameters through a single command.
l
l
l
7.1 Configuring the VoIP PSTN Service (Based on the H.248 Protocol)
This topic describes how to configure the VoIP PSTN service on the MA5616 when the H.248
protocol is used.
7.2 Configuring the VoIP PSTN Service (Based on the SIP Protocol)
This topic describes how to configure the VoIP PSTN service on the MA5616 through the
Session Initiation Protocol (SIP).
7.3 Configuring the VoIP ISDN BRA Service
This topic describes how to configure the VoIP ISDN BRA service on an IP network. When the
MA5616 uses the H.248 protocol, the device supports the access of the ISDN BRA user. ISDN
technology provides end-to-end (E2E) digital connection and supports multiple types of voice
and non-voice telecom services.
7.4 Configuring the FoIP Service (Based on the H.248 Protocol)
This topic describes how to configure the FoIP service when the H.248 protocol is used to
transmit the fax data service over the IP network.
7.5 Configuring the FoIP Service (Based on the SIP Protocol)
This topic describes how to configure the FoIP service based on the SIP protocol to transmit the
fax data service over the IP network.
7.6 Configuring the MoIP Service (Based on the H.248 Protocol)
This topic describes how to configure the MoIP service when the H.248 protocol is used to
transmit the modem data service over the IP network.
7.7 Configuring the MoIP Service (Based on the SIP Protocol)
This topic describes how to configure the MoIP service when the SIP protocol is used to transmit
the modem data service over the IP network.
7.8 Configuring the Security and Reliability of the Voice Service
For the MA5616, the security configuration of the voice service includes the H.248-based, or
SIP-based device authentication configuration. The reliability configuration of the voice service
includes the dual-homing configuration and the emergency standalone configuration.
Issue 04 (2011-10-30)
Dual homing
Supports dual homing from the MG to the MGC through the H.248 protocol and
authentication from the SIP AG to the SIP proxy server through the SIP protocol.
NOTE
In this document, the MG, AG, gateway, or SIP AG refers to the MA5616, unless otherwise stated.
Run the voice-para-template command to select the parameter profile for an area to
quickly configure the voice service. Run the display voice-para-template(sip) and display
voice-para-template(H248) commands to query the parameter configurations for different
areas.
When the parameter configurations defined in the system do not meet the requirements,
run the userdef-template-port-para command to modify the parameter configurations in
the user defined parameter profile.
If you do not use the voice configuration profile, configure the voice parameters one by
one by following the configuration steps in the next topics.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the Voice Service
207