Configuring The Fttb And Fttc Internet Access Services (Adsl2+ Access) - Huawei SmartAX MA5616 Configuration Manual

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Figure 10-2 Example network of the multiple service in FTTB and FTTC service
10.4.1 Configuring the FTTB and FTTC Internet Access Services
(ADSL2+ Access)
The OLT is connected to a remote ONU that supports ADSL2+ access by using the GPON port
to provide users with the high-speed Internet access service.
Service Requirements
l
l
l
l
Prerequisite
l
l
l
Background Information
ONUs that support ADSL2+ access include MA5616.
Procedure
l
Issue 04 (2011-10-30)
VLANs are divided are isolated different user groups, preventing broadcast storms and
facilitating O&M.
Users perform PPPoE dialup on PCs to implement high-speed Internet access.
Two VLAN tags are used to precisely identify services and users.
The same QoS is used for the same type of services on the same type of ONUs, facilitating
management.
The example network as shown in
Corresponding ONU version: V800R309C00. If another version is used, the configuration
differs slightly. For details, see the configuration guide of the corresponding ONU version.
The ADSL mode of ONU is NGADSL (namely RFC4706).
NOTE
You can run the display xdsl mode command in the privilege mode to query the ADSL mode.
Configure the OLT.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Configuration Examples of the FTTx
Figure 10-2 is complete.
493