Huawei SmartAX MA5616 Configuration Manual page 362

Multi-service access module
Table of Contents

Advertisement

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Figure 8-7 Example network of the VoIP service based on the H.248 protocol
Data Plan
After the service requirements are further confirmed and analyzed with engineers of the office,
the data plan is made by considering the interconnection with the MGC and according to the
data plan described in
Protocol).
248 protocol.
Table 8-3 Data plan for configuring the VoIP service based on the H.248 protocol
Item
MG interface
data
(The data
configuration
must be
consistent with
the data
Issue 04 (2011-10-30)
7.1 Configuring the VoIP PSTN Service (Based on the H.248
Table 8-3
provides the data plan for configuring the VoIP service based on the H.
Parameter
Media and
s of the
signaling
media
upstream VLAN
stream and
signaling
stream
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Configuration Example of Services on the MA5616
Through GPON Upstream Transmission
Data
Standard VLAN is recommended as the
upstream VLAN of the voice service. In
this section, standard VLAN 20 is
adopted.
351

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents