Huawei SmartAX MA5616 Configuration Manual page 15

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Figure 1-1 Example network of device deployment in the scenario with the NMS
The procedure for deploying network devices in the scenario with the NMS is as follows:
1.
2.
3.
4.
Issue 04 (2011-10-30)
MGC
ONU_A
According to the user's FTTx data plan, the commissioning engineer prepares the network
planning sheet and obtains the resource deployment sheet.
The commissioning engineer imports the resource deployment sheet through the NMS to
implement the predeployment for the ONU.
The hardware installation engineer draws the ONUs and sends them to the destination sites,
and then performs hardware installation, wiring, and power-on operations at the destination
sites.
The hardware installation engineer checks the running status of the ONU that is installed
and powered on.
There are two LEDs, namely Link and Auth, on the ONU.
l If the Link LED is on, it indicates that the upstream optical path is through.
l If the Auth LED is blinking, it indicates that the ONU is registering.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NMS
Router
OLT
Splitter
ONU_B
1 Deploying Network Devices
NMS client_A
NMS client_B
Splitter
ONU_C ONU_D
4