Huawei SmartAX MA5616 Configuration Manual page 397

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
Upstream
priority
Configuration Flowchart
Figure 8-15
multiple services mode based on the user-side 802.1p priority.
Figure 8-15 Flowchart for configuring the triple play service in the single-PVC for multiple
services mode based on the user-side 802.1p priority
Procedure
l
Issue 04 (2011-10-30)
Data
The 802.1p priorities are used. The VoIP service has priority 6, IPTV service
priority 5, and Internet service priority 1.
shows the flowchart for configuring the triple play service in the single-PVC for
Configure the Internet service.
1. Create a VLAN and add an uplink port to the VLAN.
huawei(config)#vlan 102 smart
huawei(config)#port vlan 102 0/0 1
2. Configure a traffic profile.
– Because the VoIP, IPTV, and Internet services are provided through the same port,
you must set the 802.1p priority of each service.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Configuration Example of Services on the MA5616
Through GPON Upstream Transmission
386