Huawei SmartAX MA5616 Configuration Manual page 62

Multi-service access module
Table of Contents

Advertisement

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Step 9 Run the quit command to quit the ANCP mode.
Step 10 Run the display ancp session command to query the information about the ANCP session.
----End
Example
Assume that:
l
l
l
l
l
l
l
To perform the preceding configurations, do as follows:
huawei(config)#ancp session 1
huawei(config-session-1)#ancp ip 10.10.10.10
huawei(config-session-1)#ancp capability topology-discovery
huawei(config-session-1)#ancp ancp-8021p 7
huawei(config-session-1)#ancp nas-tcp-port 6000
huawei(config-session-1)#ancp init-interval 20
huawei(config-session-1)#ancp keep-alive 70
huawei(config-session-1)#ancp enable
huawei(config-session-1)#quit
huawei(config)#display ancp session 1
Session config status
Session running status
Session diagnostic status
GSMP version
GSMP sub version
Configured AN name
AN name
NAS name
NAS IP
Local IP
AN instance
NAS instance
Config capabilities
Negotiate capabilities
ANCP-8021P
NAS TCP port
Startup time(0.01s)
Discontinuity time(0.01s)
Init interval(0.1s)
Keepalive interval(0.1s)
PartitionID
Bandwidth CAC status
Line config roll default
OAM threshold(0.01)
Topology report shaper interval(0.1s) : 10
S-VLAN
S-VLAN priority
C-VLAN
C-VLAN priority
Issue 04 (2011-10-30)
NOTE
Before an ANCP session is enabled, related parameters can be modified. After an ANCP session is enabled,
related parameters cannot be modified.
The GSMP communication IP address for an ANCP session is 10.10.10.10.
The interval for sending packets during the initial stage of an ANCP session is 2s.
The ANCP session capability set is topology-discovery.
The ANCP packet sending priority is 7.
The GSMP TCP communication port ID on the NAS side in an ANCP session is 6000.
The interval for sending packets during the ANCP session stage is 7s.
The ANCP function is enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: Enable
: Before syn phase
: -
: 3
: 1
: -
: -
: -
: 10.10.10.10
: -
: -
: -
: TopologyDiscovery
: -
: 7
: 6000
: -
: -
: 20
: 70
: 0
: Disable
: Disable
: 100
: -
: 7
: -
: -
3 Basic Configuration
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents