Huawei SmartAX MA5616 Configuration Manual page 157

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Example
Table 3-28
Table 3-28 Data plan for configuring the power monitoring through the H831PMU
Item
EMU
Battery
management
parameters
Charging
parameters of the
battery
Battery set power-
off parameters
Power distribution
parameters
huawei(config)#emu add 3 H831PMU 0 0 RS485
huawei(config)#interface emu 3
huawei(config-if-h831pmu-3)#power battery parameter 1 0.15 90 12
Send command to environment monitor board ,please waiting for the ack
huawei(config-if-h831pmu-3)#
Execute command successful
huawei(config-if-h831pmu-3)#power charge mode floating
Send command to environment monitor board ,please waiting for the ack
Issue 04 (2011-10-30)
provides the data plan for configuring the power monitoring through the H831PMU.
Data
Type: H831PMU
SN: 3
Subnode ID: 0
Number of battery sets: 1
Current-limiting coefficient for
battery charging: 0.15
Interval of battery equalized
charging: 90 days
Capacity of the battery set: 12 AH
Charging mode of the battery:
floating
Equalized charging voltage of the
battery: 56.8 V
Float charging voltage of the
battery: 53.5 V
Battery set power-off permission
status: permit
Battery set power-off voltage: 44 V
DC overvoltage alarm threshold: 59
V
DC undervoltage alarm threshold:
48 V
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Basic Configuration
Remarks
-
-
-
For values and details of the
parameters, see the power
battery command.
For values and details of the
parameters, see the power
charge command.
When setting the equalized and
float charging voltages of the
battery, make sure that DC
overvoltage -1 V > equalized
charging voltage > float
charging voltage +2 V, and that
DC undervoltage > load power-
off voltage > battery power-off
voltage.
For values and details of the
parameters, see the power off
command.
For values and details of the
parameters, see the power
supply-parameter command.
146