Huawei SmartAX MA5616 Configuration Manual page 449

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
Issue 04 (2011-10-30)
User priority
User type
System Parameters
Overseas Parameters
Local Digitmap name
Digitmap
Digitmap type
CAUTION
By
default,
Digitmap body
these
parameter
s need not
be
configure
d if the H.
248
protocol
is used.
You can
configure
these
parameter
s
according
to the
requireme
nts.
Attributes of a PSTN Port
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Configuration Example of Services on the MA5616
Through GE Upstream Transmission
Data
Users are common users, and the user
priority uses the default priority,
namely, cat3.
Users are common users, and the user
type uses the default user type, namely,
DEL.
According to the Context in
(Optional) Configuring the System
Parameters
engineers of the office, the default
configuration can meet the service
requirements. Therefore, the system
parameters are not configured.
According to the Context in
(Optional) Configuring the Overseas
Parameters
engineers of the office, the default
configuration can meet the service
requirements. Therefore, the overseas
parameters are not configured.
huawei
Only the normal digitmap is supported
if the H.248 protocol is used.
Plan this parameter according to the
prefix of the local phone number. In this
example, the ([2-8]xxxxxxx|[2-8]
xxSxxxxxxx|13xxxxxxxxx|
0xxxxxxxxx) digitmap body is used.
The polarity reversal charging is
required for the service. Therefore, you
need to configure the PSTN port to
which the user belongs so that the PSTN
port supports the polarity reversal
impulse. The other attributes of the
PSTN port need not be modified.
7.1.2.2
and confirmed with the
7.1.2.3
and confirmed with the
438