Huawei SmartAX MA5616 Configuration Manual page 322

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Context
The MA5616 supports configuring the SIP interface on two proxy servers (Proxy 1 and Proxy
2), where, Proxy 1 functions as the active proxy server. After Proxy 1 fails, the MG can switch
to Proxy 2 to continue working.
Procedure
Step 1 In global config mode, run the interface sip command to enter the MG interface mode.
Step 2 Run the if-sip attribute basic command to configure the IP address of the active/standby proxy
server of the SIP interface and other mandatory attributes, including the media IP address,
signaling IP address, transfer protocol, port ID, domain name and port ID of the proxy server,
homing domain name, and profile index. The dual homing is implemented through the
configuration of the active/standby proxy server.
Step 3 Run the reset command to reset the SIP interface to validate the configuration data.
----End
Example
Assume that:
l
l
l
To configure the dual homing of SIP interface 0, do as follows:
huawei(config-if-sip-0)#if-sip attribute basic media-ip 10.10.10.13
signal-ip 10.10.10.13 signal-port 5000 transfer udp primary-proxy-ip1
10.10.10.14 primary-proxy-port 5060 primary-proxy-domain proxy.domain
secondary-proxy-ip1 10.10.10.15 secondary-proxy-port 5060
{ <cr>|home-domain<K>|primary-proxy-ip2<K>|proxy-addr-mode<K>|secondary-proxy-do
main<K>|secondary-proxy-ip2<K>|server-dhcp-option<K>|sipprofile-index<K>|srvlogi
c-index<K> }:
Command:
signal-port 5000 transfer udp primary-proxy-ip1 10.10.10.14 primary-proxy-port
5060 primary-proxy-domain proxy.domain secondary-proxy-ip1 10.10.10.15
secondary-proxy-port 5060
huawei(config-if-sip-0)#if-sip attribute basic home-domain huawei.com sipprofile-
index 1
{ <cr>|media-ip<K>|primary-proxy-domain<K>|primary-proxy-ip1<K>|primary-proxy-ip
2<K>|primary-proxy-port<K>|proxy-addr-mode<K>|secondary-proxy-domain<K>|secondar
y-proxy-ip1<K>|secondary-proxy-ip2<K>|secondary-proxy-port<K>|server-dhcp-option
<K>|signal-ip<K>|signal-port<K>|srvlogic-index<K>|transfer<K> }:
Command:
huawei(config-if-sip-0)#reset
Issue 04 (2011-10-30)
The media IP address is 10.10.10.13, signaling IP address is 10.10.10.13, transfer protocol
is UDP, and port ID is 5000.
The obtaining mode of the IP address of the proxy server is the IP mode, IP address 1 of
the active proxy server is 10.10.10.14, port ID of the active proxy server is 5060, IP address
1 of the standby proxy server is, 10.10.10.15, and the port ID of the standby proxy server
is 5060.
The profile index is 1.
if-sip attribute basic media-ip 10.10.10.13 signal-ip 10.10.10.13
if-sip attribute basic home-domain huawei.com sipprofile-index 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the Voice Service
311