Huawei SmartAX MA5616 Configuration Manual page 460

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
BRA user data
Procedure
Step 1 Add a DSLD service board.
huawei(config)#board add 0/4 H832DSLD
0 frame 4 slot board added successfully
Step 2 Create a VLAN and configure the VLAN L3 interface.
huawei(config)#vlan 10
huawei(config)#interface vlanif 10
huawei(config-if-vlanif10)#ip address 10.13.4.116 16
huawei(config-if-vlanif10)#quit
Step 3 Add the uplink port to the VLAN.
huawei(config)#port vlan 10 0/0 1
Step 4 Configure the media/signaling IP address.
huawei(config)#voip
huawei(config-voip)#ip address media 10.13.4.116 10.13.1.1
huawei(config-voip)#ip address signaling 10.13.4.116
Issue 04 (2011-10-30)
Local port ID
Local IP address
MGC port ID
IP address of the primary
MGC
ISDN phone1 and ISDN
phone2
ISDN phone3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Configuration Example of Services on the MA5616
Through GE Upstream Transmission
Data
1401
10.13.4.116/16
1400
10.14.1.2/16 (IP address of the primary MGC)
l Shelf/slot/port ID of the BRA user: 0/4/0
l Phone number: 83110001
l Working mode: point to multi-point
l Terminal ID: 2
l IUA interface ID: 0
l Priority of the user: Cat3 (default)
l Shelf/slot/port ID of the BRA user: 0/4/1
l Phone number: 83110002
l Working mode: point to point
l Terminal ID: 4
l IUA interface ID: 2
l Priority of the user: Cat1
NOTE
In the point to point mode, the terminal endpoint
identifier (TEI) of the ISDN BRA digital phone is
always 0.
449