Huawei SmartAX MA5616 Configuration Manual page 500

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Servic
e
Classif
ication
VoIP
service
data
Issue 04 (2011-10-30)
Item Data
IP address of 10.10.10.10
the multicast
server
Multicast 224.1.1.10
program
Signaling 17.10.10.10/24
and media IP
addresses
Gateway IP 17.10.10.1/24
address
MG MG interface ID: 0
interface (H.
248)
NOTE
The
Signaling port ID of
parameters
the MG interface:
of the MG
interface 2944
must be the
same as the IP address of the
parameters
primary MGC to
on the MGC.
which the MG
H.248 has
interface belongs:
many
200.200.200.200/24
negotiation
parameters,
Port ID of the
and the
primary MGC to
parameters
here are which the MG
mandatory.
interface belongs:
2944
Coding mode of the
MG interface: text
Transmission mode
of the MG interface:
UDP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Configuration Examples of the FTTx
Remarks
-
-
H.248 and SIP support separate media and
signaling. The media and signaling IP
address can be the same or different.
-
It is the MG interface ID used for the VoIP
service to be configured, which determines
the virtual access gateway (VAG) specified
for the user.
It is the transport layer protocol port ID
used for the signaling exchange between
the MG and the MGC.
When dual homing is configured, the IP
address and the port ID of the secondary
MGC must also be configured.
-
The transmission mode of the MG interface
is selected according to the requirements on
the MGC. Generally, UDP is adopted.
489