Huawei SmartAX MA5616 Configuration Manual page 236

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Parameter
27
28
29
30
31
32
33
Issue 04 (2011-10-30)
Description
Indicates the type of remote
blocking play tone.
Indicates the duration of the
howler tone.
Indicates the duration of
message waiting tone.
Indicates the time limit of the
alarm for extra long call.
Indicates whether to report the
alarm for extra long call.
Indicates the minimum interval
for automatic registration of the
remote block port.
The MG interface is blocked
because the MGC does not
respond or responds
incorrectly. After this
parameter is configured, the
MG interface can automatically
register with the MGC.
Indicates whether the heartbeat
message is disabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the Voice Service
Default Setting
Numeral type. Range: 0-4.
l 0: Indicates the busy tone.
l 1: Indicates the device
congestion tone.
l 2: Indicates the mute.
l 3: Indicates the user-defined
tone 1.
l 4: Indicates the user-defined
tone 2.
Default: 0.
Numeral type. Range: 1-65535s.
Default: 60s
Numeral type. Range: 1-60000s.
Default: 3s
Numeral type. Range: 1-65535
min.
Default: 60 min.
Numeral type. Range: 0-1.
l 0: Indicates that the alarm is
reported.
l 1: Indicates that the alarm is
not reported.
Default: 1
Numeral type. Range: 0-60000s.
0 indicates that the port does not
register automatically.
Default: 1800s
Numeral type:
l 0: Indicates that the heartbeat
message is disabled.
l 1: Indicates that the heartbeat
message is enabled.
Default: 1
225