Huawei SmartAX MA5616 Configuration Manual page 389

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Table 8-8 Data plan of the triple play service based on the user-side VLAN
Item
VDSE
Traffic
profile
parameters
Uplink port
ID
Upstream
VLANs
User-side
VLANs
IGMP
version
Multicast
source
Multicast
program
library
Right profile
Multicast
users
Issue 04 (2011-10-30)
Data
Service ports: 0/1/0 and 0/1/1
Index of the VDSL2 line template bound to the port: 2, where:
l Index of the VDSL2 line profile: 3
l Index of the VDSL2 channel profile: 3
Index of the VDSL2 alarm template bound to the port: 2, where:
l Index of the VDSL2 line alarm profile: 3
l Index of the VDSL2 channel alarm profile: 3
VPI/VCI: 0/35
Internet service: 1 Mbit/s
VoIP service: 64 Kbit/s
IPTV service: no limit
0/0/1
Internet service: smart VLAN 102
VoIP service: smart VLAN 103
IPTV service: smart VLAN 104
Internet service: smart VLAN 2
VoIP service: smart VLAN 3
IPTV service: smart VLAN 4
IGMP v3 (default IGMP version in the multicast VLAN mode)
Two multicast sources:
ISP 1: with IP address 10.10.10.10, providing the multicast program with IP
address 224.1.1.1
ISP 2: with IP address 10.10.10.11, providing the multicast program with IP
address 224.1.1.2
Programs in multicast VLAN 104:
Program 1: with IP address 224.1.1.1, the program source IP address being
the same as the IP address of ISP 1 (10.10.10.10)
Program 2: with IP address 224.1.1.2, the program source IP address being
the same as the IP address of ISP 2 (10.10.10.11)
Set right profile 0. Profile 0 has the right to watch program 1 in the program
library.
User 1: User 1 (on port 0/1/0) can watch all the programs.
User 2: User 2 (on port 0/1/1) can watch only program 1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Configuration Example of Services on the MA5616
Through GPON Upstream Transmission
378