Huawei SmartAX MA5616 Configuration Manual page 327

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Procedure
Step 1 Configure a VLAN.
Configure S-VLAN 50 with the stacking attribute. The user packet goes upstream carrying two
VLAN tags. The outer VLAN tag identifies the service and the inner VLAN tag identifies the
user. The service of each user is identified by unique S-VLAN+C-VLAN, and the VLAN
forwarding mode is the S-VLAN+C-VLAN mode.
huawei(config)#vlan 50 smart
huawei(config)#vlan attrib 50 stacking
huawei(config)#vlan service-profile profile-id 1
huawei(config-vlan-srvprof-1)#forwarding vlan-connect
huawei(config-vlan-srvprof-1)#commit
huawei(config-vlan-srvprof-1)#quit
huawei(config)#vlan bind service-profile 50 profile-id 1
Step 2 Configure upstream ports.
Add upstream ports 0/0/0 to VLAN 50.
huawei(config)#port vlan 50 0/0 0
Step 3 In the ADSL access mode, follow this procedure.
1.
2.
3.
Issue 04 (2011-10-30)
MA5616 in the upstream direction. For the identification purpose, the user name and
password for dial-up Internet access must be configured on the BRAS.
Configure an ADSL2+ profile. For details, see
Here, the default ADSL2+ line template (line template 1) and the default ADSL2+ alarm
template (alarm template 1) are used as an example.
Activate the ADSL port, and bind the ADSL2+ templates.
NOTE
By default, an ADSL port is in the activated state. Before binding a template to the port, you must deactivate
the port.
In the ADSL access mode, bind the default ADSL2+ line template 1 and ADSL2+ alarm
template 1 to ADSL port 0/2/0.
huawei(config)#interface adsl 0/2
huawei(config-if-adsl-0/2)#deactivate 0
huawei(config-if-adsl-0/2)#activate 0 template-index 1
huawei(config-if-adsl-0/2)#alarm-config 0 1
huawei(config-if-adsl-0/2)#quit
Run the display traffic table command to query the existing traffic profiles in the system.
huawei(config)#display traffic table ip from-index
0
{ <cr>|to-
index<K> }:
Command:
display traffic table ip from-index
0
----------------------------------------------------------------------------
TID CIR(kbps) CBS(bytes) PIR(kbps) PBS(bytes) Pri Copy-policy
Policy
----------------------------------------------------------------------------
0 1024
pri
1 2496
pri
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Configuration Example of Services on the MA5616
3.7.1 Configuring the ADSL2+
34768 2048
81872 4992 163744
Through GPON Upstream Transmission
69536 6 -
6 -
Profile.
Pri-
tag-
tag-
316