Huawei SmartAX MA5616 Configuration Manual page 170

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
BRAS
Procedure
1.
2.
3.
4.
5.
Issue 04 (2011-10-30)
Data
The BRAS performs the related
configurations according to the
authentication and accounting
requirements for dial-up users. For
example, the BRAS configures the
access user domain (including the
authentication plan, accounting plan,
and authorization plan bound to the
domain) and specifies the RADIUS
server.
If the BRAS is used to authenticate
users, you need to configure the user
name and the password for each user
on the BRAS. If the BRAS is used to
allocate IP addresses, you must
configure an IP address pool on the
BRAS.
5.1 Configuring a VLAN
Configuring VLAN is a prerequisite for configuring a service. Hence, before configuring
a service, make sure that the VLAN configuration based on planning is complete.
5.2 Configuring an Upstream Port
This topic describes how to add an upstream port for an Internet access service to a VLAN.
5.3 Configuring an xDSL Port
An xDSL can transmit services only when it is activated. This topic describes how to
activate an xDSL port and bind the port with an xDSL profile.
5.4 Creating an xDSL Service Port
A service port is a service channel connecting the user side to the network side. To provide
services, a service port must be created.
5.5 (Optional) Configuring the xPoA-xPoE Protocol Conversion
Configuring protocol conversion is required only when the encapsulation mode is IPoA or
PPPoA; it is not required when the encapsulation mode is IPoE or PPPoE.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the xDSL Internet Access Service
Remarks
-
159