Huawei SmartAX MA5616 Configuration Manual page 255

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
Voice service
data
(The data
configuration
must be
consistent with
the data
configuration
on the MGC.)
Issue 04 (2011-10-30)
Slot that houses the voice
service board
User Data Phone number
User priority
User type
Centrex
System Parameters
Overseas Parameters
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the Voice Service
Remarks
-
The phone number that the IMS core
network device allocates to the user
must be configured.
According to the service requirements,
the user priority needs to be specified.
The user priorities are as follows:
l cat1: government1 (category 1
government users)
l cat2: government2 (category 2
government users)
l cat3: normal (common users,
default priority in the system)
According to the service requirements,
the user type needs to be specified. The
user type includes the following:
l DEL: direct exchange lines (default
type in the system)
l ECPBX: earth calling PBX
l LCPBX: loop calling PBX
l PayPhone: pay phone
According to the local standards, the
out-centrex prefix and out-centrex
attributes need to be configured.
The system parameters including the
overseas version flag and message
waiting indication (MWI) mode need to
be configured according to the local
standards to ensure that the response of
the user terminal complies with the
local standards.
The attributes such as the upper and
lower thresholds of the flash-hooking
duration need to be configured
according to the local standards to
ensure that the response of the user
terminal complies with the local
standards.
244