Huawei SmartAX MA5616 Configuration Manual page 191

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Step 5 Run the display igmp config global command to check whether the parameters are configured
correctly.
----End
Example
To configure multicast general query parameters by setting the query interval to 150s, maximum
response time to 20s, and query count to 3, do as follows:
huawei(config)#btv
huawei(config-btv)#igmp proxy router gen-query-interval 150
huawei(config-btv)#igmp proxy router gen-response-time v3 200
huawei(config-btv)#igmp proxy router robustness 3
To configure multicast group-specific query parameters by setting the query interval to 20s,
maximum response time to 10s, and query count to 3, do as follows:
huawei(config)#btv
huawei(config-btv)#igmp proxy router sp-query-interval 200
huawei(config-btv)#igmp proxy router sp-response-time v3 100
huawei(config-btv)#igmp proxy router sp-query-number 3
Result
Check whether the multicast general query parameters and group-specific query parameters are
configured correctly.
huawei(config)#btv
huawei(config-btv)#display igmp config global
----------------------------------------------------------------------
Authorization
Robustness variable
is 3.
General query interval(s)
query is 150s.
V2 General query response time(0.1s)
V3 General query response time(0.1s)
the general query is 20s.
Specific query interval(0.1s)
specific query is 10s.
V2 Specific query response time(0.1s) : 8
V3 Specific query response time(0.1s) : 100
the group-specific query is 10s.
Specific query number
queries is 3.
V2 router present timeout(s)
User action report switch
Preview switch
Recognition time(s)
The time of reset preview-count
Auto create log interval(h)
Uplink port mode
Bandwidth management switch
CDR auto report interval(s)
CDR auto report number
CDR switch
IGMP Packet encapsulation
IGMP ECHO switch
Router IP
Initial unsolicited report interval(s): 1
Query offline user switch
BTV Forward Mode
----------------------------------------------------------------------
Issue 04 (2011-10-30)
6 Configuring the Multicast Service (Multicast VLAN Mode)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: enable
: 3 //The count of general queries
: 150 //The interval of the general
: 100
: 200 //The maximum response time of
: 200 //The interval of the group-
//The maximum response time of
: 3 //The count of group-specific
: 400
: disable
: enable
: 30
: 04:00:00
: 2
: default
: enable
: 600
: 200
: disable
: all
: disable
: 192.168.1.1
: -
: Mvlan
180