Huawei SmartAX MA5616 Configuration Manual page 384

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Service Requirements
l
l
l
Networking
Figure 8-11
Broadband users through multiple MA5616s are authenticated on a BRAS to obtain the
broadband service provided by the carrier. The BRAS supports the user identification through
L2 VLAN. The outer VLAN tag identifies the MA5616 that accesses users, and the inner VLAN
tag identifies the users of the device.
Figure 8-11 Example network for configuring the VLAN ID extension
MA5616_A
Data Plan
Table 8-7
Table 8-7 Data plan for configuring the VLAN ID extension
Item
MA5616_A
Issue 04 (2011-10-30)
The Internet access service is deployed on the network.
Two VLAN IDs are allocated on the BRAS to identify four access users.
The MA5616 is used on the GPON upstream transmission network.
shows the example network for configuring the VLAN ID extension.
BRAS
LSW
OLT
VLAN 100 VLAN 101
User 1 User 2 User 3 User 4
provides the data plan for configuring the VLAN ID extension.
Data
Uplink port: 0/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Configuration Example of Services on the MA5616
MA5616_B
Through GPON Upstream Transmission
373