Huawei SmartAX MA5616 Configuration Manual page 355

Multi-service access module
Table of Contents

Advertisement

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Device
Procedure
Step 1 Create VLANs and add an uplink port to the VLANs.
huawei(config)#vlan 4002-4003 smart
huawei(config)#port vlan 4002-4003 0/0 1
Step 2 Configure service ports.
huawei(config)#service-port 100 vlan 4002 vdsl mode ptm 0/1/0 multi-service user-
vlan untagged
rx-cttr 6 tx-cttr 6
huawei(config)#service-port 101 vlan 4003 vdsl mode ptm 0/1/1 multi-service user-
vlan untagged
rx-cttr 6 tx-cttr 6
Step 3 Configure multicast VLANs and the IGMP mode.
huawei(config)#multicast-vlan 4002
huawei(config-mvlan4002)#igmp mode proxy
Are you sure to change IGMP mode?(y/n)[n]:y
huawei(config-mvlan4002)#multicast-vlan 4003
Issue 04 (2011-10-30)
Item
Multicast
source
Program
library
Multicast user
NOTE
The IGMP mode can be configured to IGMP proxy or IGMP snooping according to the requirements. In
this example, the IGMP mode is IGMP proxy. If the planned IGMP mode is IGMP snooping, you can
configure the IGMP snooping mode by running the igmp mode snooping command in multicast VLAN
mode.
The IGMP mode can be switched only when the IGMP mode is off.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Configuration Example of Services on the MA5616
Through GPON Upstream Transmission
Data
There are two multicast sources, namely, ISP 1 and ISP 2.
l ISP 1: with IP address 10.10.10.10, providing the
multicast program with IP address 224.1.1.1
l ISP 2: with IP address 10.10.10.11, providing the
multicast program with IP address 224.1.1.2
Program in multicast VLAN 4002:
Program 1: with IP address 224.1.1.1 and the IP address
of the program source is the same as the IP address of ISP
1, namely, 10.10.10.10
Program in multicast VLAN 4003:
Program 2: with IP address 224.1.1.2 and the IP address
of the program source is the same as the IP address of ISP
2, namely, 10.10.10.11
Multicast user 1:
l VDSL2 port: 0/1/0
l Multicast VLAN: 4002
Multicast user 2:
l VDSL2 port: 0/1/1
l Multicast VLAN: 4003
344

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents