Configuring The Xdsl Profile; Configuring The Adsl2+ Profile - Huawei SmartAX MA5616 Configuration Manual

SmartAX MA5616 Multi-service Access Module
Configuration Guide
l To configure attributes for the VLANs with consecutive IDs in batches, run the vlan attrib vlanid to end-
l To configure attributes for the VLANs with inconsecutive IDs in batches, run the vlan attrib vlan-list
Step 3 (Optional) Configure VLAN description.
To configure VLAN description, run the vlan desc command. You can configure VLAN
description to facilitate maintenance. The general VLAN description includes the usage and
service information of the VLAN.
Step 4 (Optional) Configure the VLAN forwarding policy.
vlan-connect corresponds to the S+C forwarding policy, which ensures higher security by
solving the problems of insufficiency in the MAC address space, MAC address aging, and MAC
address spoofing and attacks.
To configure the VLAN forwarding policy in the VLAN service profile, do as follows:
1.
2.
3.
4.
5.
----End
Example
Assume that a QinQ VLAN with ID of 100 is to be configured for an enterprise user to ensure
higher security and the VLAN forwarding policy is S+C. For the VLAN, description needs to
be configured for easy maintenance. To configure such a VLAN, do as follows:
huawei(config)#vlan 100 smart
huawei(config)#vlan attrib 100 q-in-q
huawei(config)#vlan desc 100 description qinqvlan/forhuawei
huawei(config)#vlan service-profile profile-id 1
huawei(config-vlan-srvprof-1)#forwarding vlan-connec
Info: Please use the commit command to make modifications take effect
huawei(config-vlan-srvprof-1)#commit
huawei(config-vlan-srvprof-1)#quit
huawei(config)#vlan bind service-profile 100 profile-id 1

3.7 Configuring the xDSL Profile

Configuring the xDSL profile is a prerequisite for configuring an xDSL access service. This
topic describes how to configure an ADSL2+ profile, an SHDSL profile, and a VDSL2 profile.

3.7.1 Configuring the ADSL2+ Profile

This topic describes how to configure an ADSL2+ line profile and an ADSL2+ line alarm profile.
Issue 04 (2011-10-30)
NOTE
vlanid command.
command.
Run the vlan service-profile command to create a VLAN service profile and enter the
VLAN service profile mode.
Run the forwarding command to configure the VLAN forwarding policy. The default
VLAN forwarding policy is VLAN+MAC in the system.
Run the commit command to validate the profile configuration. The configuration of the
VLAN service profile takes effect only after execution of this command.
Run the quit command to quit the VLAN service profile mode.
Run the vlan bind service-profile command to bind the VLAN to the VLAN service profile
created in 4.1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Basic Configuration
57