Huawei SmartAX MA5616 Configuration Manual page 307

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Default Configuration
Table 7-27
attributes, you can change the values according to the service requirements.
Table 7-27 Default values of the attributes of an ISDN BRA port
Parameter
Autodeactive
Autodeactive-delay
Activemode
Remotepower
Unialarm
Workmode
Procedure
Step 1 In global config mode, run the braport command to enter braport mode.
Step 2 Run the braport attribute set command to configure the attributes such as the working mode,
auto-deactivation status, and remote power supply status of the port.
If an ISDN BRA port needs to be connected to multiple terminal users, configure the working
mode of the port to p2mp. If an ISDN BRA port needs to be connected to only one terminal user,
configure the working mode of the port to p2p.
For detailed description of the braport attribute set command, see the parameter description
in braport attribute set.
----End
Example
Assume that the working mode is p2mp, the activation mode is stable, and the auto-deactivation
function is disabled. To configure such attributes of ISDN BRA port 0/4/0, do as follows:
huawei(config)#braport
huawei(config-braport)#braport attribute set 0/4/0 workmode p2mp activemode stable-
active
huawei(config-braport)#display braport attribute
{ frameid/slotid/portid<S><Length 1-15>|frameid/slotid<S><Length 1-15> }:0/4/0
Command:
-----------------------------------------------------------------------------
F
-----------------------------------------------------------------------------
0
-----------------------------------------------------------------------------
Issue 04 (2011-10-30)
lists the default values of the attributes of an ISDN BRA port. When configuring the
display braport attribute 0/4/0
/S /P Remotepower Workmode Autodeactive Deactivedelay Activemode Unialarm
/4 /0 disable p2mp
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Setting
Disable
30
unstable-active
Disable
Disable
p2mp
disable 30
7 Configuring the Voice Service
stable disable
296