Huawei SmartAX MA5616 Configuration Manual page 221

Multi-service access module
Table of Contents

Advertisement

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
Issue 04 (2011-10-30)
Domain name of
the MG interface
Device name of
the MG interface
Start negotiation
version of the H.
248 protocol for
the MG interface
Digitmap of an MG Interface
Software Parameters of an
MG Interface
Ringing Mode of an MG
Interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the Voice Service
Remarks
It corresponds to parameter
domainName of the MG interface.
When the H.248 protocol is used, this
parameter must be configured if
parameter MIDType of the H.248
message is configured as the domain
name. Otherwise, the MG interface fails
to be started. In other situations, this
parameter is optional.
It is supported only by the H.248
protocol, and corresponds to parameter
deviceName of the MG interface that
uses the H.248 protocol.
When the H.248 protocol is used, this
parameter must be configured if
parameter MIDType of the H.248
message is configured as the domain
name. Otherwise, the MG interface fails
to be started. In other situations, this
parameter is optional.
It is recommended that you configure
this parameter to 0, which indicates the
negotiation is performed according to
the profile.
If the MGC interconnected with the MG
is provided by another vendor, the
profile must be configured.
The digitmaps here are used for certain
special applications such as emergency
calls and emergency standalone. The
digitmaps for common phone services
are sent to the AG by the MGC, and
therefore such digitmaps need not be
configured on the AG. If the services
such as emergency calls and emergency
standalone are not required, the
digitmaps need not be configured.
According to the service requirements,
the configuration of software
parameters determines whether the MG
interface supports the functions such as
dual homing and emergency
standalone.
According to the service requirements,
the ringing modes of the MG interface
need to be determined.
210

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents