Huawei SmartAX MA5616 Configuration Manual page 495

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Table 10-2 Data plan for the FTTx GPON access
Servic
e
Classif
ication
Networ
k data
Device
manage
ment
Issue 04 (2011-10-30)
Item Data
FTTH OLT PON port:
0/1/1
ONT ID: 1-2
FTTB/C OLT PON port:
0/2/1
ONT ID: 1-2
FTTO/M OLT PON port:
0/3/1
ONT ID: 1
P2P FE ports of the
OPFA board on the
OLT:
l 0/5/1
l 0/5/2
l 0/5/3
Inband NMS 192.168.50.1/24
IP address of
the OLT
Management 8
VLAN of the
OLT
Inband NMS ONU 1:
IP address of 192.168.50.2/24
the MDU
ONU 2:
192.168.50.3/24
Management 8
VLAN of the
MDU
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Configuration Examples of the FTTx
Remarks
In the current network, FTTH, FTTB, and
FTTC can be implemented on the same
OLT. Generally, different slots are used for
the implementation. Implementing various
FTTx networks concurrently, however, is
not recommended in general.
To configure the MDU from the OLT by
logging in to the MDU through Telnet, the
management VLAN of the OLT and that of
the MDU must be the same, and the
management IP address of the OLT and that
of the MDU must be in the same network
segment.
In the GPON access, the network
management protocol of the MDU adopts
SNMP and that of the ONT adopts OMCI.
484