Huawei SmartAX MA5616 Configuration Manual page 385

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Item
MA5616_B
Procedure
l
Issue 04 (2011-10-30)
Data
Upstream VLAN ID (outer VLAN tag): 100
VLAN attribute: Stacking VLAN
User 1:
l Access port: 0/1/2
l Inner VLAN tag: 11
User 2:
l Access port: 0/1/3
l Inner VLAN tag: 12
Uplink port: 0/0/1
Upstream VLAN ID (outer VLAN tag): 101
VLAN attribute: Stacking VLAN
User 3:
l Access port: 0/1/2
l Inner VLAN tag: 11
User 4:
l Access port: 0/1/3
l Inner VLAN tag: 12
The procedure for configuring the VLAN ID extension on MA5616_A is as follows:
1. Create a VLAN.
huawei(config)#vlan 100 smart
2. Set the VLAN attribute to stacking VLAN.
huawei(config)#vlan attrib 100 stacking
3. Add an uplink port to the VLAN.
huawei(config)#port vlan 100 0/0 1
4. Add service ports to the VLAN.
huawei(config)#service-port vlan 100 vdsl mode ptm 0/1/2 multi-service
user-encap pppoe
rx-cttr 6 tx-cttr 6
huawei(config)#service-port vlan 100 vdsl mode ptm 0/1/3 multi-service
user-encap pppoe
rx-cttr 6 tx-cttr 6
5. Set the inner VLAN tag.
huawei(config)#display service-port all
{ <cr>|sort-by<K>||<K> }:
Command:
display service-port all
-------------------------------------------------------------------------
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Configuration Example of Services on the MA5616
Through GPON Upstream Transmission
374