Huawei SmartAX MA5616 Configuration Manual page 107

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Context
l
l
Procedure
Step 1 Configure the AAA authentication scheme.
l The authentication scheme specifies how all the users in an Internet service provider (ISP) domain are
l The system has a default authentication scheme named default. It can be modified, but cannot be deleted.
1.
2.
3.
4.
Step 2 Create a domain.
1.
Step 3 Refer the authentication scheme.
1.
2.
Step 4 Configure a local user.
In the AAA mode, run the local-user password command to create a local AAA user.
----End
Example
User1 in the isp domain adopts the local server for authentication. The authentication scheme is
newscheme, the password is a123456, do as follows:
huawei(config)#aaa
huawei(config-aaa)#authentication-scheme newscheme
Info: Create a new authentication scheme
huawei(config-aaa-authen-newscheme)#authentication-mode local
huawei(config-aaa-authen-newscheme)#quit
huawei(config-aaa)#domain isp
Issue 04 (2011-10-30)
The local AAA configuration is simple, which does not depend on the external server.
The local AAA supports only authentication.
NOTE
authenticated. The system supports up to 16 authentication schemes.
Run the aaa command to enter the AAA mode.
Run the authentication-scheme command to add an authentication scheme.
Run the authentication-mode local command to configure the local authentication mode.
Run the quit command to return to the AAA mode.
NOTE
l A domain is a group of users of the same type.
l In the user name format userid@domain-name (for example, huawei20041028@huawei.net), "userid"
indicates the user name for authentication and "domain-name" followed by "@" indicates the domain
name.
l The domain name for user login cannot exceed 15 characters, and the other domain names cannot
exceed 20 characters.
In the AAA mode, run the domain command to create a domain.
NOTE
You can refer an authentication scheme in a domain only after the authentication scheme is created.
In the domain mode, run the authentication-scheme command to reference the
authentication scheme.
Run the quit command to return to the AAA mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Basic Configuration
96