Table of Contents
Advertisement
SmartAX MA5616 Multi-service Access Module
Configuration Guide
Figure 9-15 Flowchart for configuring the triple play service in the single-PVC for multiple
services mode based on the user-side 802.1p priority
Procedure
l
Issue 04 (2011-10-30)
Configure the Internet service.
1.
Create a VLAN and add an uplink port to the VLAN.
huawei(config)#vlan 102 smart
huawei(config)#port vlan 102 0/0 1
2.
Configure a traffic profile.
– Because the VoIP, IPTV, and Internet services are provided through the same port,
you must set the 802.1p priority of each service.
– Generally, the priorities are in a descending order for the VoIP service, IPTV
service, and Internet service. In this example, set the traffic profile index to 7 and
the 802.1p priority of the Internet service to 1.
huawei(config)#traffic table ip index 7 cir 1024 priority 1 priority-
policy loca
l-Setting
3.
Add service ports to the VLAN.
Add service ports to the VLAN and use the traffic profile configured in the preceding
step.
huawei(config)#service-port vlan 102 vdsl mode atm 0/1/0 vpi 0 vci 35
multi-serv
ice user-8021p 2 rx-cttr 7 tx-cttr 7
huawei(config)#service-port vlan 102 vdsl mode atm 0/1/1 vpi 0 vci 35
multi-serv
ice user-8021p 2 rx-cttr 7 tx-cttr 7
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Configuration Example of Services on the MA5616
Through GE Upstream Transmission
470
Hide quick links:
Advertisement
Table of Contents
