Huawei SmartAX MA5616 Configuration Manual page 30

SmartAX MA5616 Multi-service Access Module
Configuration Guide
Figure 3-9 Example network for configuring outband management over a LAN in the telnet
mode
LAN
PC
In this example network, the IP address of the maintenance Ethernet port of the MA5616 and
the IP address of the maintenance terminal are in the same network segment. You can also
manage the MA5616 through an outband channel by directly connecting the maintenance
Ethernet port of the maintenance terminal to the maintenance Ethernet port on the control board
of the MA5616.
Data Plan - LAN
Table 3-1
mode.
Table 3-1 Data plan for configuring outband management over a LAN in the telnet mode
Item
Maintenance Ethernet port of the
MA5616
Ethernet port of the maintenance
terminal
Networking - WAN
Figure 3-10
the telnet mode.
Issue 04 (2011-10-30)
MA5616
PC PC
provides the data plan for configuring outband management over a LAN in the telnet
shows an example network for configuring outband management over a WAN in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
IP address: 10.10.20.2/24
IP address: 10.10.20.3/24
3 Basic Configuration
19