Huawei SmartAX MA5616 Configuration Manual page 20

SmartAX MA5616 Multi-service Access Module
Configuration Guide
l
----End
Result
l
l
Issue 04 (2011-10-30)
– If all the required boards are inserted correctly and all the boards are in the normal
state, the operation ends.
– If a required board is not inserted in the device, insert the board and run the board
confirm command to confirm the board in the auto-find state. Then, run the display
board command to query the status of all the boards.
The procedure of checking the board status through the iManager U2000 is as follows:
1. In the Workbench window, double-click
displayed. Click
2. In the Search dialog box, select Board from the Search Type drop-down list and
enter the description of the board to be queried. Then, click Search.
3. In the search result, select the desired board of the MA5616. Click Locate to
Board. Then, verity that the board type and slot meet the requirements of the data
planning and verify the board status.
The status of all the boards is "Normal" in the result of the query on the MA5616.
All the boards on the MA5616 are in the normal state, represented by
the query through the iManager U2000.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
.
2 Checking Before the Configuration
. The Main Topology window is
, in the result of
9