Table of Contents
Advertisement
SmartAX MA5616 Multi-service Access Module
Configuration Guide
services can hold a burst of the total user bandwidth so that the total user bandwidth can be
managed in a unified manner.
Context
The voice service, IPTV service, and Internet access service of each user share a total user
bandwidth. The service with the highest class of service (CoS) priority is ensured first. When
other services carry no traffic, the only service can hold a burst of the total user bandwidth. The
multicast bandwidth is determined by the bandwidth of ordered programs. The total bandwidth
of ordered programs cannot exceed the total user bandwidth. The voice service uses a fixed
bandwidth.
Procedure
l
Issue 04 (2011-10-30)
For ADSL2+ and VDSL access users.
Each port corresponds to a user. By limiting the upstream/downstream rate of the port, set
the maximum upstream/downstream rate to the total user bandwidth. All triple play services
of the user hold the total user bandwidth, and the service with the highest CoS priority is
ensured first. When other services carry no traffic, each service can hold a burst of the total
user band width.
1.
Set the maximum upstream/downstream rate to the total user bandwidth.
– For the ADSL2+ access mode:
a.
Run the adsl line-profile quickadd command to quickly add an ADSL2+
line profile, or run the interactive adsl line-profile add command to add an
ADSL2+ line profile.
b.
Run the adsl channel-profile quickadd command to quickly add an ADSL2
+ channel profile, or run the interactive adsl channel-profile add command
to add an ADSL2+ channel profile. In the channel profile, configure the
maximum upstream and downstream rates to limit the user bandwidth.
c.
Run the adsl line-template quickadd command to quickly add an ADSL+
line template, or run the interactive adsl line-template add command to add
an ADSL2+ line template.
– For the VDSL (common mode) access mode:
a.
Run the vdsl line-profile quickadd command to quickly add a VDSL line
profile, or run the interactive vdsl line-profile add command to add a VDSL
line profile.
b.
Run the vdsl channel-profile quickadd command to quickly add a VDSL
channel profile, or run the interactive vdsl channel-profile add command to
add a VDSL channel profile. In the channel profile, configure the maximum
upstream and downstream rates to limit the user bandwidth.
c.
Run the vdsl line-template quickadd command to quickly add a VDSL2 line
template, or run the interactive vdsl line-template add command to add a
VDSL2 line template.
– For the VDSL (TI mode) access mode:
a.
Run the vdsl service-profile quickadd command to quickly add a VDSL2
service profile, or run the interactive vdsl service-profile add command to
add a VDSL2 service profile.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Basic Configuration
120
Hide quick links:
Advertisement
Table of Contents
