Blank Print (No Print) - Xerox Phaser 6125 Service Manual

Blank Print (No Print)

Phaser 6125/6130 Color Laser Printer Service Manual
The entire image area is blank.
Initial Actions
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
Laser Unit Kit (PL4.1.99)
Imaging Unit (PL4.1.21)
Dispenser Assy (PL5.1.1)
Toner Cartridge K (PL5.1.21)
Toner Cartridge C (PL5.1.22)
Toner Cartridge M (PL5.1.23)
Toner Cartridge Y (PL5.1.24)
Transfer Unit (PL6.1.7)
Sub Drive Assembly (PL7.1.1)
Main Drive Assembly (PL7.1.2)
Feed Drive Assembly (PL7.1.4)
IP Board (PL8.1.9)
MCU Board (PL8.2.13)
Troubleshooting Procedure Table
Step Actions and Questions
Check the Toner Type
1
Is non-Xerox Toner in use?
Is the image printed correctly?
2
Reseat the Toner Cartridges, and
3
check that their lock keys are in the
lock positions.
Is the image printed correctly?
Print-Quality Troubleshooting
Example Print
Yes No
Replace the Go to step 3.
toner with the
Xerox toner,
then go to step
2.
Complete Replace the IP
Board
(page 8-60).
Complete Go to step 4.
s6180-318
5-25