Connecting The Ups Monitoring Cable; Connecting The Ups2000-G Monitoring Cable (Snmp); Connecting The Ups5000G-A Monitoring Cable - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide

4.2.5 Connecting the UPS Monitoring Cable

4.2.5.1 Connecting the UPS2000-G Monitoring Cable (SNMP)

Prerequisites
A network cable used for monitoring is prepared.
Procedure
Step 1 Connect one end of a network cable to the Ethernet port on the SNMP card of the
UPS2000-G.
Figure 4-21 Ethernet port
(1) Ethernet port
Step 2 Connect the other end of the network cable to the Ethernet port on the switch.
----End

4.2.5.2 Connecting the UPS5000G-A Monitoring Cable

Prerequisites
A network cable used for monitoring is prepared.
Procedure
Step 1 Connect one end of a network cable to the FE port of the UPS5000-A.
Issue 03 (2019-03-10) Copyright © Huawei Technologies Co., Ltd.
4 Connecting Monitoring Cables to Devices
75