Huawei iManager NetEco 6000 Device Installation And Commissioning Manual page 72

Hide thumbs Also See for iManager NetEco 6000:
Table of Contents

Advertisement

iManager NetEco 6000
Device Installation and Commissioning Guide
No.
1
2
3
4
5
6
7
8
Ports on the 2288H V5 rear panel
Figure 4-3 Ports on the 2288H V5 rear panel
Table 4-3 2288H V5 port description
No.
1
2
Issue 03 (2019-03-10)
Interface
Type
eth0 GE
interface
eth1 GE
interface
eth2 GE
interface
eth3 GE
interface
Server serial
interface
VGA interface
USB interface
iBMC
management
network
interface
Interface
Type
eth0 GE
interface
eth1 GE
interface
Copyright © Huawei Technologies Co., Ltd.
4 Connecting Monitoring Cables to Devices
Description
Used for connecting to the LAN switch. eth0 and eth1
comprise a bond, which is used for providing external
services.
If southbound and northbound network isolation is
not adopted, only eth0 or eth1 is required.
If southbound and northbound network isolation is
adopted, both eth0 (or eth1) and eth2 (eth3) are
required.
eth0 (or eth1) is used for providing southbound
services while eth2 (or eth3) is used for providing
northbound services.
Used for connecting to the SMS modem or
commissioning.
Used for connecting to the monitor or KVM.
Used for connecting to the USB service or the KVM.
Used for connecting to the PC to manage the RH5885
V3 server.
Description
Used for connecting to the LAN switch. eth0 and eth1
comprise a bond, which is used for providing external
services.
If southbound and northbound network isolation is
61

Advertisement

Table of Contents
loading

Table of Contents