Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
If not all ActiveX controls are enabled, the test connection fails after filling in the correct
parameter information and clicking Test.
Enable ActiveX controls. For details, see
Table 6-8 Parameter description
Parameter
Server IP Address
Server Port Number
Server Version
Login User
Issue 03 (2019-03-10)
Description
Indicates the IP address of
the video server and correct
IPv4 address, containing
numbers from 0 to 255. The
IP address cannot be 0.0.0.0.
Indicates the port number of
the server.
NOTE
The default port number for
VCN500 is 9900.
Indicates the version of the
server.
Indicates the user name for
logging in to the IVS client.
NOTE
Only browsing and query
permissions are required
on the NetEco. Configure
video system users who
have only browsing and
query permissions.
The default user name for
VCN500 is Admin. It is
recommended that the new
user name created using
the IVS be used to access
the camera. Before
accessing the camera,
ensure that the initial
password of the user has
been changed and the user
has successfully logged in
to the IVS.
It is recommended that the
number of IVS clients to
which the user can log in
be set to a value greater
than 5. Otherwise, when
the user has logged in to
the IVS client, the user
cannot log in to it through
the NetEco.
Copyright © Huawei Technologies Co., Ltd.
6.3.2.6 Registering with the OCX
Example
XXX.XXX.XXX.XXX
9900
VCN500
Admin
6 Adding Devices
Plug-in.
150
Advertisement
Table of Contents
