Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 6-7 Login page
Figure 6-8 Home page
Step 5 Set CIM parallel parameters.
1.
Issue 03 (2019-03-10)
If multiple CIMs need to be connected to a LAN switch, set Parallel.
The following parameter settings use the parallel CIMs as an example. For operation on a single
CIM, refer to this section.
On the CIM WebUI home page, choose Monitoring > CIM System > Running
Parameter > Parallel Configuration, and select Parallel.
Figure 6-9 Setting parameters for the parallel system
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
135
Advertisement
Table of Contents
