Adding A Camera Using Automatic Discovery - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
2.
3.
----End

6.3.2.7 Adding a Camera Using Automatic Discovery

This topic describes how to quickly add an online camera that is not in any management
domain to a management domain using the automatic discovery function provided by the
system.
Prerequisites




Procedure
Step 1 Choose Configuration > Configuration Management > Camera Management from the
main menu. The Camera Management window is displayed.
Step 2 In the left navigation tree, choose Discovery Camera.
Step 3 On the Discovery camera page, add a camera by following the instructions provided in
Figure
Issue 03 (2019-03-10)
Find C disk directory folder exists eSDK_IVS folder, right-click to select Delete.
Restart Internet Explorer, enter the IP address for accessing the NetEco client, and open
the page for video modules. The NetEco automatically installs the OCX plug-in.
You have logged in to the NetEco client by web browser
You have the operation rights for Camera Management.
You have set parameters on the Parameter Configuration page, and the connection
between the NetEco and VCN500 server is successful.
A camera has connected to the VCN500 server.
6-27.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
155