Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 6-79 Configuring parameters for an electronic door lock
Table 6-37 Device parameter description
Parameter
Name
IP address
Port
Device Address
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
Description
Device name
Set the IP address of the data collector to
which the device connects.
Set this parameter to the port through which
the device connects to the collector.
To learn ports on the ECC collector, see
Setting RS485 Parameters for the ECC500
V6 Collector.
Set this parameter to the address set on the
device.
6 Adding Devices
229
Advertisement
Table of Contents
