Routine Maintenance For Temperature Sensors; Routine Maintenance For The Temperature And Humidity Sensor; Routine Maintenance For The Camera - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide

7.1.2.2 Routine Maintenance for Temperature Sensors

Table 7-9 Routine Maintenance for Temperature Sensors
Item
Check the
availability of
the temperature
sensor.

7.1.2.3 Routine Maintenance for the Temperature and Humidity Sensor

Table 7-10 Routine maintenance for the temperature and humidity sensor
Item
Check the
availability of
the temperature
and humidity
sensor.

7.1.2.4 Routine maintenance for the camera

Table 7-11 Routine maintenance for the camera
Item
Issue 03 (2019-03-10)
Maintenan
ce Interval
Semi-annua
lly
Maintenan
ce
Frequency
Semi-annua
lly
Mai Method
nten
ance
Inte
rval
Copyright © Huawei Technologies Co., Ltd.
Method Expected
Result
Hold the Hold the
temperature temperature
sensor probe in sensor probe in
your palm, and your palm, and
check the check the
temperature temperature
displayed for the displayed for the
corresponding corresponding
rack rack environment
environment unit unit on the
on the WebUI. WebUI.
Method Expected
Result
Check the The reading is
reading on the normal and
temperature and accurate.
humidity sensor.
Expected
Result
7 Device Maintenance
Exception
Handling
If the
temperature does
not go up, check
whether the
temperature
sensor cable is
loose or
disconnected. If
so, reconnect the
cable. If not,
replace the
temperature
sensor.
Troubleshooti
ng
If the reading is
inaccurate, check
and calibrate the
temperature and
humidity sensor
using a
temperature and
humidity
measuring
instrument with
higher precision.
Exception Handling
257