Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
6.2 Scenarios for Connecting the server
6.2.1 Setting SMS
This section describes how to set the interworking parameters of the SMS modem on the
NetEco. This ensures that the NetEco can communicate with the SMS modem properly and
the modem sends short messages to users properly.
Prerequisites
Context
Issue 03 (2019-03-10)
Figure 6-4 Deleting multiple modules in batches page
b.
Select multiples and click Delete.
c.
In the displayed Confirm dialog box, click OK.
You have logged in to the NetEco client by web browser
An SMS modem has been installed and commissioned.
You have obtained the interworking parameters, such as the phone number for receiving
the notification, of the SMS modem from users.
You have the operation rights for Set Notified Server.
The SMS modem is not supported in cloud deployment scenarios.
You need to input calling number and Email for sending remote alarm notification. Therefore, you
are obligated to take considerable measures, in compliance with the laws of the countries concerned
and the user privacy policies of your company, to ensure that the personal data of users is fully
protected.
Personal data such as phone numbers and Email addresses are anonymized in the NetEco GUI and
encrypted in the NetEco during batch data transmission to ensure data security.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
131
Advertisement
Table of Contents
