Change History - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
Symbol

Change History

Changes between document issues are cumulative. The latest document issue contains all the
changes made in earlier issues.
Issue 03 (2019-03-10)


Issue 02 (2019-01-10)






Issue 01 (2018-03-21)
This issue is the first official release.
Issue Draft A (2017-11-27)
This issue is used for first office application (FOA).
Issue 03 (2019-03-10)
Updated the air conditioner name to smart cooling product.
Updated some MDU screenshots.
Modified the "Setting Monitoring Parameters for a Hydrogen Sensor" section.
Modified the "Adding a Camera on the VCN500" section.
Modified the alarm names on the alarm renaming page for the ECC500 V6 access
package of MED_Collector_HUAWEI_ECC500V6_SNMP_V1.2.
Added the description about performance counter renaming.
Added the description about connecting cables to the double door interlock.
Added the "Creating a Temperature Sensor on the NetEco" section.
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.
Calls attention to important information, best practices and
tips.
NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.
About This Document
iii