Huawei iManager NetEco 6000 Device Installation And Commissioning Manual page 191

iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 6-41 Configuring RPDU SNMP parameters
Table 6-20 SNMP v1/v2 device parameter description
Parameter
Name
IP Address
Port
Read Community
Issue 03 (2019-03-10)
Description
Device name
Set this parameter to the device IP address.
Set this parameter to the port number of the device. (set to 161 by
default)
Set this parameter to the read community set on the device. (set to
public by default)
Modifying community per three months is advised.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
180