Basic Operations Before Adding Devices; Creating A Domain - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
Insecure Communications Protocol
IPMI 1.5
SSL 2.0 and SSL 3.0
TLS 1.0
Devices may have insecure algorithms and protocols. A risk may occur when you use these
algorithms and protocols. You are advised to replace these devices with those supporting
secure algorithms and protocols or upgrade these devices to a version supporting secure
algorithms and protocols.

6.1 Basic Operations Before Adding Devices

6.1.1 Creating a Domain

This section describes how to configure managed domains.
Prerequisites
You have logged in to the NetEco client by web browser
You have the operation rights for Data Center Planning.
Context
The types of the managed domain: Park, Building, Room, Container, Subnet, NetecoSite. You
are advised to plan the affiliation before configuring the managed domains.
To create management domain, note that:





Procedure
Step 1 Choose Configuration > Configuration Management > Data Center Planning from the
main menu. The Data Center Planning window is displayed.
Step 2 Add managed domains.
Issue 03 (2019-03-10)
You can create Park, Building, Building-ShapeNode, ContainerDC, Room,
Room-ShapeNode, Subnet, NetecoSite, FusionModule500 and Site under Root.
You can create Building, Building-ShapeNode, ContainerDC, Room, and
Room-ShapeNode under Park.
You can create only Floor-ShapeNode under Building.
You can create Device, Cooling, Oil Machine, Power, Monitor, AIO, Union, and
Transformer under ContainerDC.
You can create Park, NetecoSite, FusionModule500, Modular, and Site under Subnet.
Copyright © Huawei Technologies Co., Ltd.
Secure Communications Protocol
IPMI 2.0
TLS 1.1, TLS 1.2
6 Adding Devices
123