How To Change The Preset Password For The Ecc500 Collector - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
Step 5 Log in to the ECC800 WebUI.
1.
2.
----End
8.5 How to Change the Preset Password for the ECC500
Collector
Prerequisites


Context
Preset passwords of the ECC500 V6 and ECC800 collectors can be modified in the same way.
This topic uses the ECC500 V6 collector as an example to describe the modification method.
Issue 03 (2019-03-10)
1. Open Internet Explorer and choose Tools > Internet Options > General.
2. Select Delete browsing history on exit and click Delete.
3. In the Delete Browsing History dialog box, select all options except Password, and click Delete.
Enter https://monitoring IP address (such as monitoring IP address
https://192.168.1.10) in the address box of the browser, and then press Enter to enter
the WebUI login page.
Figure 8-4 WebUI login page
On the login page, enter the preset user name admin and preset password Changeme,
set the language, and click Log In.
 Change the password after your first login.
An account is logged out due to timeout if no operation is performed within 10 minutes after system

login.
 It is recommended that a maximum of three users log in to the ECC WebUI at the same time.
A PC with an IP address in the same network segment as the ECC500 V6 collector is
prepared, and the PC has been connected to the ECC500 V6 collector over a switch.
You have obtained the IP address of the ECC500 V6 collector.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
300