Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
1.
2.
3.
Table 6-3 Management domain parameter list 1
Item
Management Info
Parent
Object
Type
Name
SN
Description
Plan Power
(kW)
Description
Issue 03 (2019-03-10)
In the navigation tree, choose the father node where you want to add a managed domain.
In the Domain area which is below the navigation tree, drag a managed domain icon to
the required position in the view.
You can adjust the shape of room, Room-ShapeNode, Building-ShapeNode, Floor-ShapeNode,
Container-ShapeNode, background planning NetEco site, and domains and devices created at the
background planning NetEco site: Holding down the Shift key and the left mouse button and then
clicking on the corresponding lines can increase the small yellow dot. You can drag the small yellow dot
to adjust the shape of the managed domain icon.
To delete a domain, click the domain icon and select Delete under
In the right side of the view area, set Management Info.
You can configure Management Info, Electricity Info, and Refrigeration Info for the equipment room
management domain.
Table 6-3
lists the configuration parameters for Park, Building, ContainerDC, and
Subnet.
Table 6-3
and
NetecoSite.
Description
Name of the upper-level
management domain
Type of the created
management domain
Name of the created
management domain
No. of the created
management domain
Physical location of the
created management
domain
Total power designed for
the created management
domain
Description about the
created management
domain
Copyright © Huawei Technologies Co., Ltd.
Table 6-4
list the configuration parameters for Room and
Configuration Requirements
Identified by the system.
Identified by the system.
1–128 characters.
Range: 0-128 characters
Range: 0-64 characters
Range: floating point number of 1-10000000
(accurate to three decimal places)
Range: 0-255 characters
6 Adding Devices
.
124
Advertisement
Table of Contents
