Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Context
This section applies to the settings of the card reader with a keypad, fingerprint and card
reader, and fingerprint and card reader with a keypad.
Procedure
Step 1 Choose Configuration > Configuration Management > Data Center Planning from the
main menu. The Data Center Planning window is displayed.
Step 2 Select the management domain to add a device.
Step 3 In the lower-left corner of the page, click the Device tab.
Step 4 Click the drop-down list box in Type and select Fingerprint Controller.
Step 5 Select the device to be added and drag its icon to the management domain.
Step 6 Specify parameters shown in
Issue 03 (2019-03-10)
To delete a device, click the device and choose Delete under
Copyright © Huawei Technologies Co., Ltd.
Figure 6-78
in the right pane based on the following table.
6 Adding Devices
.
226
Advertisement
Table of Contents
