Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 4-39 Connecting cables to the access controller
(1) Connecting the power cable for the
access controller
Table 4-14 Power cable connection for the access controller
Power Supply
Power supply outside the equipment room
Related Information
Table 4-15 Card reader and key terminal definition
Terminal Identity
BT
R-AL
R-BP
R-LED
R-D1
Issue 03 (2019-03-10)
Definition
Key input
Card reader pry signal input
Control card reader buzzer
Control card reader LED lights
Card reader data 1
Copyright © Huawei Technologies Co., Ltd.
4 Connecting Monitoring Cables to Devices
(2) Connecting to the power supply, as
described in
Table 4-14
Cable Connection
Install the connector (BOM number:
14170096) to the other end of the power
cable and connect the power cable to a
circuit breaker in the power supply outside
the equipment room.
96
Advertisement
Table of Contents
