Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Step 3 Use a Phillips screwdriver to remove the transparent cover, lightly press the inner cover
without blocking the two holes, and remove the inner cover.
Figure 3-34 Removing a camera cover
Step 4 Connect the cables to the tails of the camera, perform insulation operations on the cables (see
Connect Cables), and put the cables through the cable entry on the wall.
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
3 Installing Devices
37
Advertisement
Table of Contents
