Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
(1) Water detector
(4) Conversion cable end B,
connecting to the water detection
cable
Procedure
Step 1 Connect the water detection cable to the conversion cable.
Figure 3-21 Connecting the water detection cable to the conversion cable
(1) Conversion cable end B, connecting to
the water detection cable
Issue 03 (2019-03-10)
Figure 3-20 Water sensor components
The water detection cable and conversion cable are interconnected through the male and female
connectors.
Copyright © Huawei Technologies Co., Ltd.
(2) Conversion cable end A,
connecting to the water detector
(5) Water detection cable end A,
connecting to the conversion cable
(2) Water detection cable end A, connecting
to the conversion cable
3 Installing Devices
(3) Conversion
cable
(6) Water
detection cable
29
Advertisement
Table of Contents
