Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Procedure
Step 1 Choose System > System Settings > Set Notified Server from the main menu. The Set
Notified Server window is displayed.
Step 2 In the navigation tree on the left, choose SMS Modem.
Step 3 Set interworking parameters of the SMS modem. For details, see
Figure 6-5 Setting interworking parameters of the SMS modem
Table 6-6 Parameters of the SMS modem
Parameter
Network system of
SMS modem
SMS modem serial
port
SMS modem
bound rate
Mobile number for
receiving
notification
Step 4 Click Apply to save the settings.
----End
Issue 03 (2019-03-10)
Description
RAT of the SMS modem: GSM.
Serial port for connecting the SMS modem on the server.
COM1 or COM2.
SMS modem bound rate provided in the SMS modem user manual.
115200, 9600 or 4800.
Phone number to which the short messages are sent.
NOTE
Mobile number for receiving notification must be set according to the
following requirements:
1. A country code must be added preceding the calling number. For example,
2. If short messages are successfully sent but the subscriber does not receive
Click Test to check the connection between the NetEco and the SMS modem.
Click Reset to reset interworking parameters of the SMS modem.
Copyright © Huawei Technologies Co., Ltd.
if the subscriber is located in China, the entered calling number is in the
following format: 86 + Calling number.
the short messages, you need to remove the country code.
6 Adding Devices
Figure
6-5.
132
Advertisement
Table of Contents
