Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Step 3 Specify User Name, Password and Verify Code and click Log In.
login dialog box.
Figure 6-43 Login dialog box of the ECC500 V6 collector
Step 4 Choose System Settings > IP Address Settings, set the IP address, subnet mask and default
gateway for the ECC500 V6 collector based on the assigned parameters for the ECC500 V6
collector, as shown in
Figure 6-44 Setting ECC500 V6 collector IP address
Step 5 Click Submit.
Issue 03 (2019-03-10)
This operation is performed on the Windows 7 OS. If other OSs are used, perform this operation based
on actual conditions.
If you log in to the ECC500 V6 collector for the first time, enter admin as the user name and 000001 or
Changeme as the password. After you log in to the ECC500 V6 collector successfully, change the
password for security. For details, see
Collector.
Figure
Copyright © Huawei Technologies Co., Ltd.
8.5 How to Change the Preset Password for the ECC500
6-44.
6 Adding Devices
Figure 6-43
shows the
183
Advertisement
Table of Contents
